Jordan - Draft Technical Regulation on Energy Labelling for Electronic Displays

​This Regulation establishes requirements for the labelling of, and the provision of supplementary product information on electronic displays, including televisions, monitors and digital signage displays.

This Regulation shall not apply to the following:

1. any  electronic  display  with  a  screen  area  smaller  than  or  equal  to  100  square centimeters;
2. projectors;
3. all-in-one video conference systems;
4. medical displays;
5. virtual reality headsets;
6. displays integrated or to be integrated into products listed in points 3(a) and 4 of Article 2 of Directive 2012/19/EU of the European Parliament and of the Council (8);
7. electronic displays that are components or subassemblies of products covered by implementing measures adopted under Directive 2009/125/EC;
8. broadcast displays;
9. security displays;
10. digital interactive whiteboards;
11. digital photo frames;
12. digital signage displays which meet any of the following characteristics:
- designed and constructed as a display module to be integrated as a partial image area of a larger display screen area and not intended for use as a standalone display device;
- distributed self-contained in an enclosure for permanent outdoor use;
- distributed self-contained in an enclosure with a screen area less than 30 dm2 or greater than 130 dm2;
- the display has a pixel density less than 230 pixels/cm2 or more than 3 025 pixels/cm2;
- a peak white luminance in standard dynamic range (SDR) operating mode of greater than or equal to 1 000 cd/m2;
- no  video  signal  input  interface  and  display  drive  allowing  the  correct display  of  a  standardized  dynamic  video  test  sequence  for  power measurement purposes;

13. status displays;
14. control panels​.